Attach wire mesh to one end of the tube using glue or tape. Tunnel traps, or kill traps, can be used to dispose of one squirrel at a time. The price range for simple plastic devices, like choker type traps or plastic gopher tubes is from $12 to $14.
Push One End Of The Squirrel Pole Through The Ground And Let It Lean Toward A Tree.
The wire should be held securely enough that the squirrel can't pry it off the tubing. You want to set the plugged end on the ground and rest the open end against a branch etc. Set the trap near any burrows, holes, or apparent tunnels squirrels are using.
In Addition, Because This Trap Kills The Pest, It Is Important That It.
Position the cage in an area where you have seen the squirrels active, and place some bait inside the cage. Place the trap in the target area, with the wire mesh on the ground. Another device designed specifically for ground squirrels is a live trap cage capable of catching up to 25 critters at a time.
For The Top Piece, One Hole 2 Inches From The Top Will Do, On Either Side.
Use a powered drill to make about 10 holes along the sides of the pipe. Now, the bait which maybe grains or small nuts, need to kept at the mouth of the bucket, and the bait will be attached. This humane diy squirrel trap can help you eliminate those pesky little varmints!
Live Animal Trap For Squirrels | Source:
These traps can be set on tree branches or any ledges a squirrel uses to access a home. The inside of the pvc pipe will be slippery and squirrels will have a. Once the squirrel enters the cage to get the bait, the door will close behind them,.
For The Base Do Not Drill 6" From Either End, Put 6 In The Middle.
Slide another piece of cardboard underneath the box to seal it. Set the trap where you know there is squirrel activity. Many of our customers come to us after diy.
